IFF Suspension : ACTA : ACTA 20
Self-Clinbing hoist with up to 3m(10') pipe and up to 6 lighiting circuits
The self-climbing configuration is one of the most common uses of the ACTA 20, as well as the easiest and fastest to install. The ropes exit the unit vertically upwards and attach to the studio ceiling rig via a pre-mounted rail. Travel is up to 10m (32ft), while the under-hanging batten pipe can be up to 3m (9’10”) long, with up to 6 lighting circuits to respond to most common requirements. Thanks to the reduced dimensions of the ACTA 20 motor unit, making it ideal for smaller or lower studios where hoist height/size is of key importance.
 |
Connector Strip: 1m (32") |
 |
|
|
Lighting bar: 3m (10’) |
|
|
|
Travel: 10m (32’) |
|
|
|
Lighting circuits: 6 |
|
|
|
Cat 5: 1 |
|
|
|
Video and audio connections optional |
|
|
|
Adjustable operating limits |
|
|
|
Overload detection |
|
|
|
Slack wire detection |
|
|
|
Over travel limits |
|
|
|
Thermal motor protection |
|
|
| Code | Max. recommended | Closed | Travel | Safe working | Weight | |||||||
| installation height | height | Load | ||||||||||
| FF3904PS06U30 | 8.5m | 27' | 0.9m | 2'-4" | 6m | 19' | 110kg | 241Lbs | 70kg | 124lbs | ||
| FF3904PS08U30 | 9.5m | 31' | 0.9m | 2'-4" | 8m | 26' | 100kg | 220Lbs | 75kg | 164Lbs | ||
| FF3904PS10U30 | 11.5m | 37' | 0.9m | 2'-4" | 10m | 32' | 100kg | 220Lbs | 80kg | 175Lbs | ||
| Motor | CE | UL (E217891) / CSA |
| Power | 0.55kW | 2/3HP |
| Voltage | 400VAC (3-phase) | 208VAC (3-phase) |
| Lifting speed (average) | 6m/min | 30FPM |
| Lifting cable | (4) 3.2mm 7x19 galvanized carbon steel aircraft cable | |
| Safety Switches | ||
| Operating limits | 2 adjustable limits | |
| Over travel protection | Lower and upper limit (factory preset) | |
| Slack wire detection | 1 for each steel cable | 1 for each steel cable |
| Overload detection | 1 for each pick-up point | 1 for each steel cable |
| Lighting bar | ||
| IFF rail type 80 | 1m to 3m | 3'-3" to 10' |
| Pipe ø50mm (2") | 1m to 3m | 3'-3" to 10' |
| Connector strip | ||
| Folded steel | 1m | 3'-3" |
| Lighting circuits | 6 | 6 |
| Receptacles | On request | On request |
| Cat 5 | 1 | 1 |
| DMX | 1 | 1 |
| Mounting brackets | ||
| (2) FF3674 | (60 to 120)mm wide I-beam | 2.4" to 4.7" wide I-beam |
| (2) FF3968 | Carriages for IFF rail type 80 | |
| Please contact IFF for special mounting requirements | ||
Please complete the form below and we'll get back to you as soon as possible.