IFF Suspension : Combi Hoist : Combi-Hoist-U60

Lighting Hoist with a 7.3m (24') long traveling connector strip / lighting bar assembly for up to 12 lighting circuits.

IFF

The modular IFF Combi Hoist offers a wide range of design options for onstage electric hoists, front of house lighting hoists and scenery hoists. The drive unit and diverter pulley are mounted stationary to the ceiling. The moving section of the Combi Hoist is connector strip / lighting bar assembly. The complete system is under static and dynamic conditions self-sustaining, which makes susceptible mechanical braking systems mandatory and reduces the maintenance requirements to a minimum. The IFF radial winding drums eliminate any risk of cross winding during operation. The Combi Hoist (FF3907) is UL tested and approved as a complete system.

Code Max. recommended  Closed height Travel Safe working load Weight    
  installation height          
FF3907P080U60 10.5m 34' 1m 3'-6" 8m 26' 179kg 395Lbs 230kg 510Lbs  
FF3907P095U60 12.0m 39' 1m 3'-6" 9.5m 31' 166kg 365Lbs 240kg 530Lbs  
FF3907P110U60 13.5m 44' 1.1m 3'-8" 11m 36' 155kg 341Lbs 240kg 530Lbs  
FF3907P140U60 17.0m 55' 1.3m 4'-2" 14m 46' 138kg 304Lbs 250kg 550lbs  
     

 

Motor CE UL (E217891) / CSA       
Power 1.5kW 2.0HP  
Voltage 400VAC (3-phase) 208VAC (3-phase)  
Lifting speed (average) 9m/min 30FPM  
Lifting cable 4mm 7x19 galvanized carbon steel aircraft cable  
     
Safety Switches      
Operating limits 2 adjustable limits    
Over travel protection Lower and upper limit (factory preset)  
Slack wire detection 1 for each steel cable    
Overload detection 1 for each pick-up point 1 for each steel cable  
     
Lighting bar      
IFF rail type 80 6m to 7.3m 20' to 24'  
Pipe ø50mm (2") 6m to 7.3m 20' to 24'  
     
Connector strip      
Folded steel 6m 19'-8"  
Lighting circuits 8 / 12    
Receptacles On request On request  
Cat 5 1 / 2    
     
Mounting brackets      
(2)   FF3907BA-10 Clamp for up to 10mm / 3/8" thick flanges (flange up to 4" wide)  
(2)   FF3907BA-16 Clamp for up to 16mm / 5/8" thick flanges (flange up to 4" wide)  
(2)   FF3907BB-48 Interface bracket for 4" - 8" wide flange  
(2)   FF3907BB-812 Interface bracket for 8" - 12" wide flange  
     
Support steel must be in line with the hoist. Please contact IFF for special mounting requirements

 

 

 

Connector Strip: 5.99m (19'-8")
Lighting bar: up to 7.3m (24’)
Travel: up to 14m (46’)
Lighting circuits: 6 / 8 / 12
Cat 5: 1 / 2
Video and audio connections optional
Adjustable operating limits
Overload detection
Slack wire detection
Over travel limits
Thermal motor protection
UL / CSA / CE /BGVC1
Connector Strip: 5.99m (19'-8")
Lighting bar: up to 7.3m (24’)
Travel: up to 14m (46’)
Lighting circuits: 6 / 8 / 12
Cat 5: 1 / 2
Video and audio connections optional
Adjustable operating limits
Overload detection
Slack wire detection
Over travel limits
Thermal motor protection
UL / CSA / CE /BGVC1

Please complete the form below and we'll get back to you as soon as possible.