audio-technica AT8656/LED

AT8656/LED

ADD AN LED AND A SWITCH TO YOUR INSTALL MICROPHONES

Designed to be recessed into a table, the AT8656/LED Microphone Adapter facilitates the use of any gooseneck microphone or 21 mm button type surface microphone with a 3-pin XLRM output, such as the ES945 and ES947 microphones in various presentation environments. It has a red / green LED lamp indicating the status of the microphone, and a touch button (switch) to manually switch the microphone from mute to unmute.

The adapter also has a locking switch which automatically locks the microphone in place from insertion to the manual release by the user.

• Adapter allows the installation into a ceiling, wall or table of any gooseneck microphone or button-type surface mic of 21mm diameter, equipped with a 3-pin XLRM output
• Quick assembly for install microphones, allowing integration with discretion
• The possibility of contact closure allows the controlling of external devices through a built-in switch
• The touch button allows the user to switch the Microphone from Mute (open) to Unmute (closed) and back.
• Operates on 24-48V phantom power
• The 360° ring-shaped red / green LED lamp indicates the status of the microphone
• The latch automatically locks the microphone in place, holding it firmly until manually unlocked by the user
• The adapter output is a 3-pin XLRM
• Supplied with insulation washers for damping the vibration surface

“RED/GREEN LED LAMP”

The AT8656/LED is equipped with a 360° LED lamp ring that visually indicates the status of the built-in microphone (open / closed). It works through the microphone's phantom power, without the need for an additional external power supply.

“ACCEPTS A WIDE RANGE OF MICROPHONES”

The AT8656/LED accepts all Audio-Technica Quickmount gooseneck microphones (Propoint, Unipoint and Engineered Sound ranges) as well as button-type surface microphones (ES945 and ES947).

“FAST INSTALLATION”

The AT8656/LED can be discreetly and stylishly integrated into the conference room table. Before each meeting, simply plug your gooseneck microphones into the AT8656/LED, and within minutes the conference can begin. At the end of the meeting, the microphones can be unlocked and removed from their adapter to make way for an open table.