audio-technica ES947/LED

CARDIOID CONDENSER BOUNDARY MICROPHONE WITH LED

Contractor-exclusive innovations for every acoustical challenge
Safe haven from Radio Frequency Interference (RFI)
Low-profile cardioid condenser boundary microphone
Designed for clear, highly intelligible sound reinforcement, teleconference
Mounts unobtrusively in table-tops, ceilings and wall panels
Available in black (ES947/LED) or white (ES947W/LED)

ES947/LED

CONTROL AT YOUR FINGERTIPS

Engineered Sound have been the preferred choice of providers and other more upscale installers. This line of microphones incorporates UniGuard ™ technology that protects microphone interference related to mobile phones. Engineered Sound microphones provide the best sound quality in a discreet design. The new Engineered Sound. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI.

This low-profile cardioid condenser boundary microphone is recommended for unobtrusive table-, ceiling-, or panel-mount applications in high-quality sound reinforcement, professional recording and teleconferencing. Designed for permanent installation, the microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a cardioid pattern for enhanced gain before feedback and improved signal-to-noise ratio. It is available in two colors: black (ES947/LED) and white (ES947W/LED).

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording and teleconferencing
  • Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle
  • Mounts unobtrusively in table-tops, ceilings and wall panels
  • Self-contained power module with XLRM-type output connector
  • Rugged all-metal case with a two-layer steel mesh grille
  • Integral LED ring indicates mute status-green when mic is live, when muted red
  • Isolators provide mechanical dampening of mounting-surface vibration
  • Requires 11V to 52V DC phantom power
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Available in two colors: black (ES947) and white (ES947W)
 

“PURIFIED DESIGN”

With a diameter of 38mm, the ES947/LED is extremely discreet and fits perfectly into a table, ceiling or wall.

“GREEN/RED LED STATUS LIGHT”

The ES947/LED is equipped with a 360° LED light ring that visually indicates the status of the integrated microphone (on / off). It works through the microphone's phantom power, without requiring an additional external power supply.

“INDEPENDENT POWER MODULE”

The ES947/LED is equipped with an autonomous power supply module with an XLRM-type output connector, eliminating the need for an external power module.

 
 

LED STATUS LIGHT

The integrated circular LED light indicates the microphone's status; it stays green when the microphone is on and red when it is off.

TOUCH SWITCH

The touch switch located next to the capsule of the ES947/LED enables users to easily switch the microphone on or off.

Uniguard

UNIGUARD TECHNOLOGY

The UniGuard® shielding technology fitted to all microphones in the Engineered Sound series offers outstanding rejection of radio frequency interference (RFI).

2 COLOURS AVAILABLE

The ES947/LED is available in two colors: black (ES947/LED) or white (ES947W/LED), allowing the discreet integration of the unit into the room decor.

ES947/LED
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response 40-13,000 Hz
Open Circuit Sensitivity -40 dB (10 mV) re 1V at 1 Pa
Impedance 200 ohms
Maximum Input Sound Level 142 dB SPL, 1 kHz at 1% T.H.D.
Switches Touch-sensitive control: on/mute
Dynamic Range 114 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 66 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 5.7 mA typical
Weight 66 g (2.3 oz)
Dimensions 84.8 mm (3.33") long,
38.0 mm (1.49") diameter
48.0 mm (1.89") maximum width
Output Connector Integral 3-pin XLRM-type
Accessories Included One pair isolators

Please complete the form below and we'll get back to you as soon as possible.