audio-technica PRO44
UNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE
Very low-profile design for minimum visibility
Wide-range condenser element with low-mass diaphragm
Self-contained electronics eliminate need for external power modules
Rugged design and construction
25' (7.6 m) detachable cable (TA3F to XLRM-type)
Dimensions 73mm x 90.5mm x 15mm
PRO44
UNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE
With its half-space unidirectional polar pattern, low-profile design, and outstanding sound quality, the PRO44 is ideal for conference tables, podiums, lecterns and other installed-sound uses. This versatile boundary mic's self-contained electronics eliminate the need for external power modules. The PRO44 is equipped with a wide-range condenser element with low-mass diaphragm for superior performance.
- Low-profile design for minimum visibility
- Wide-range condenser element with low-mass diaphragm for superior performance
- Self-contained electronics eliminate need for external power modules
- Rugged design and construction
- 25' (7.6 m) detachable cable (TA3F to XLRM-type)
| Element | Condenser |
| Polar Pattern | Half-cardioid (cardioid in hemisphere above mounting surface) |
| Frequency Response | 70 - 16,000 Hz |
| Open Circuit Sensitivity | -25dB (56.2mV) re 1V at 1 Pa |
| Impedance | 100 ohms |
| Maximum Input Sound Level | 114 dB SPL, 1 kHz at 1% T.H.D. |
| Dynamic Range | 86 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 66 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 9-52V, 2 mA typical |
| Weight | 67 g |
| Dimensions | 2.87" (73.0 mm) maximum width, 3.56" (90.5 mm) maximum length, 0.59" (15.0 mm) height |
| Output Connector | Integral 3-pin XLRM-type |
| Cable | 25' (7.6 m) long, with TA3F and XLRM-type connectors |
Please complete the form below and we'll get back to you as soon as possible.