audio-technica PRO47T

CARDIOID CONDENSER THREAD-MOUNT GOOSENECK MICROPHONE, 315MM

Wide-range condenser element with low-mass diaphragm
Self-contained electronics eliminate need for external power modules
Flat, smooth frequency response
Quiet, fixed-placement, long-life gooseneck
3.0 m cable permanently attached between microphone and XLRM connector
Requires 9V to 52V DC phantom power

Audio-Technica
PRO47T

PRO47T

CARDIOID CONDENSER THREAD-MOUNT GOOSENECK MICROPHONE, 315MM

This double-gooseneck cardioid condenser microphone with integral power module and 5/8"-27 adapter-mount is ideal for boardroom, school, government, house of worship and other installed applications. Featuring a wide-range condenser element with low-mass diaphragm for superior performance, the microphone's self-contained electronics eliminate need for external power modules. Available in two lengths: 15.79" (PRO47TL) and 12.40" (PRO47T).

  • Wide-range condenser element with low-mass diaphragm for superior performance
  • Self-contained electronics eliminate need for external power modules
  • Flat, smooth frequency response
  • Quiet, fixed-placement, long-life gooseneck
  • Direct mounts to any 5/8"-27 stand, or to included threaded mounting stud
  • 9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector
  • Overall length of 15.79" (401.0 mm)
  • Also available in a 12.40" (315.0 mm)-long version as PRO47T
PRO47T
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 70 - 16,000 Hz
Open Circuit Sensitivity -37 dB (14.1 mV) re 1V at 1 Pa
Impedance 100 ohms
Maximum Input Sound Level 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 106 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 66 dB, 1 kHz at 1 Pa
Phantom Power Requirements 9-52V DC, 2 mA typical
Weight 63 g
Dimensions 12.40" (315.0 mm) long, 0.47" (12.0 mm) head diameter
Output Connector 3-pin XLRM-type on cable
Cable 9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector
Accessories Included AT8146 windscreen; AT8425 5/8"-27 threaded mounting stud

Please complete the form below and we'll get back to you as soon as possible.