audio-technica PRO47TL
CARDIOID CONDENSER THREAD-MOUNT GOOSENECK MICROPHONE, 401MM
Wide-range condenser element with low-mass diaphragm
Self-contained electronics eliminate need for external power modules
Flat, smooth frequency response
Quiet, fixed-placement, long-life gooseneck
3.0 m cable permanently attached between microphone and XLRM connector
Requires 9V to 52V DC phantom power
PRO47TL
CARDIOID CONDENSER THREAD-MOUNT GOOSENECK MICROPHONE, 401MM
This double-gooseneck cardioid condenser microphone with integral power module and 5/8"-27 adapter-mount is ideal for boardroom, school, government, house of worship and other installed applications. Featuring a wide-range condenser element with low-mass diaphragm for superior performance, the microphone's self-contained electronics eliminate need for external power modules. Available in two lengths: 15.79" (PRO47TL) and 12.40" (PRO47T).
- Wide-range condenser element with low-mass diaphragm for superior performance
- Self-contained electronics eliminate need for external power modules
- Flat, smooth frequency response
- Quiet, fixed-placement, long-life gooseneck
- Direct mounts to any 5/8"-27 stand, or to included threaded mounting stud
- 9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector
- Overall length of 15.79" (401.0 mm)
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Cardioid |
| Frequency Response | 70 - 16,000 Hz |
| Open Circuit Sensitivity | -37 dB (14.1 mV) re 1V at 1 Pa |
| Impedance | 100 ohms |
| Maximum Input Sound Level | 134 dB SPL, 1 kHz at 1% T.H.D. |
| Dynamic Range | 106 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 66 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 9-52V DC, 2 mA typical |
| Weight | 67 g |
| Dimensions | 15.79" (401.0 mm) long, 0.47" (12.0 mm) head diameter |
| Output Connector | 3-pin XLRM-type on cable |
| Cable | 9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector |
| Accessories Included | AT8146 windscreen; AT8425 5/8"-27 threaded mounting stud |
Please complete the form below and we'll get back to you as soon as possible.