audio-technica U853RU
UNILINE™ CONDENSER HANGING MICROPHONE, BLACK
Designed for suspension over choirs, instrumental groups and theater stages
UniLine® polar pattern provides narrow 90° acceptance angle
UniGuard® RFI-shielding technology offers outstanding rejection of RF
UniSteep® filter provides a steep low-frequency attenuation
Accepts interchangeable elements
Available in two colors: black (U853RU) and white (U853RWU)
WHERE TO BUY
U853RU
UNILINE™ CONDENSER HANGING MICROPHONE, BLACK
Featuring Audio-Technica's UniLine® line-cardioid element, the U853RU UniLine condenser hanging microphone is equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference. The phantom-powered microphone accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine® line cardioid polar patterns. Its 80 Hz low-cut UniSteep® filter reduces pickup of low-frequency ambient noise.
- Designed for suspension over choirs, instrumental groups and theater stages
- UniLine® polar pattern provides narrow 90° acceptance angle
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
- Low-profile design with low-reflectance finish for minimum visibility
- Available in two colors: black (U853RU) and white (U853RWU)
- Operates on phantom power
| Element | Permanently polarized condenser |
| Polar Pattern | Line Cardioid |
| Frequency Response | 30 - 20,000 Hz |
| Open Circuit Sensitivity | -39 dB (11.2 mV) re 1V at 1 Pa |
| Impedance | 250 ohms |
| Maximum Input Sound Level | 135 dB SPL, 1 kHz at 1% T.H.D. |
| Low Frequency Roll Off | 80 Hz, 18 dB/octave |
| Switches | Flat, roll-off |
| Dynamic Range | 115 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 74 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 11-52V DC, 2 mA typical |
| Weight | 14 g (0,5 oz) |
| Dimensions | 1.34" (34.0 mm) long, 0.48" (12.2 mm) diameter |
| Output Connector | Integral 3-pin XLRM-type |
| Cable | 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector |
| Accessories Included | AT8154 two-stage foam windscreen; AT8451 steel hanger; AT8538 power module; AT8438 5/8"-27 stand adapter |
Please complete the form below and we'll get back to you as soon as possible.