audio-technica BP893CL4
SUBMINIATURE OMNIDIRECTIONAL CONDENSER HEADWORN MICROPHONE, LEMO FOR SENNHEISER WIRELESS
Offers the ultimate in low-profile, high-performance audio
Delivering clear and accurate sound in an inconspicuous package
Lightweight, ergonomic design
Protected by a highly durable Parylene coating
Terminated for Sennheiser® wireless systems using Lemo connector
55" (1.4 m) Cable permanently attached to mic
BP893CL4
REMARKABLE SOUND CLARITY AND PRECISION IN TOTAL DISCRETION
With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893 MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios.
The BP893 MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin. The Lemo connector on the BP893cL4 plugs straight into Sennheiser® wireless handheld transmitters.
- Lightweight, ergonomic design and discreet earpiece, the capsule diameter is 2.6mm; ideal for applications requiring near-invisibility
- Outstanding clarity and intelligibility
- Extremely unobtrusive, 1-inch flexible boom
- Secure over-the-ear placement
- Extended frequency response for natural vocal reproduction on stage, in the theatre, at conferences and in places of worship.
- Locking 4-pin microphone output connector compatible with included power module and all Audio-Technica UniPak® body-pack wireless transmitters
- UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Protected by a highly durable Parylene coating, the headworn microphone is designed to withstand the rigors of everyday use
- The Lemo connector on the BP893cL4 plugs straight into Sennheiser® wireless handheld transmitters with the same connection type.
- Available in black and beige, wired and wireless models: BP893cL4 – less power module; 55" (1.4 m) cable terminated for Sennheiser wireless systems using Lemo connector; BP893cL4-TH – same as BP893cL4, but in "theatre" colour (beige)
“VERY LIGHTWEIGHT AND ERGONOMIC”
With its ultra light weight of 2g and a capsule diameter of 2.6mm, the BP893cL4 ear-worn microphone is one of the lightest and most discreet microphones of its type on the professional audio market. It sits comfortably on the earlobe, and the extremely unobtrusive one-inch flexible boom sits discreetly over the face, with the 2.6mm pinhead capsule at the end.
“ELECTRET CAPSULE”
The omnidirectional electret capsule provides a clear and natural voice reproduction, similar to that of a high-quality lavalier microphone. Its sleek design makes it ideal for use in theatre, places of worship and broadcast studios.
“PARYLENE COATING”
Parylene is a transparent semi crystalline polymer film, recognized for its thermodynamic stability, high resistance to solvents and low permeability. The BP893cL4 is therefore easy to clean, and the acidity of the skin will not alter its appearance.
PARYLENE COATING
The transparent parylene coating on the BP893cL4 guarantees very easy routine maintenance.
SUBMINIATURE CAPSULE
At barely bigger than a pinhead, the BP893cL4 omnidirectional capsule delivers a natural and intelligible sound.
ACCESSORIES INCLUDED
The BP893cL4 comes with a cable clip, two windscreens, two capsule protections and protection against moisture.
LEMO CONNECTOR
The BP893cL4 comes with a Lemo connector on a 1.4m long shielded cable, for Sennheiser® wireless systems.
Element | Fixed-charge back plate, permanently polarised condenser |
Polar Pattern | Omnidirectional |
Weight | Microphone, boom & earpiece: 2 g |
Dimensions | Microphone: 8.1 mm (0.32") long, 2.6 mm (0.10") diameter Boom: 26.4 mm (1.04") long, 1.07 mm (0.04") diameter |
Output Connector | Lemo |
Cable | 1.4 m (55") long (permanently attached to microphone), 1.6 mm (0.06") diameter, 2-conductor shielded cable with Lemo connector |
Accessories Included | AT8464 dual-ear microphone mount; AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; carrying case |
Please complete the form below and we'll get back to you as soon as possible.